XFP 32 Zone Repeater Panel (all protocols)

10.00 лв.

Ex Tax: 10.00 лв.

Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all potential fire service entrances).
Offers all of the functions and controls of an XFP Main panel (access levels 1, 2 and 3).
Includes an on-board fault relay.
Requires its own dedicated Mains power and battery back-up supply.
A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel.
Communication between the XFP Main panel and Repeater requires a CFP761 network driver card (fitted as standard in all XFP510-16s, available as an optional extra on Main XFP 16 Zone panels).
Repeater network wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres

Technical data fire alarm control panels
Power supply:	230V 50/60Hz.
Internal power supply:	27Vdc
Total output current limited to:	3A @ 230Vac (Imax.A 250mA; Imin. 70mA)
Max battery size and type:	2x 7Ah/12V
Auxiliary relays:	Fault (Failsafe; Capable of switching 1A @ 30V DC; Must not be used for switching Mains voltages).
Display:	2 line x 40 character backlit display
Indicators:	16 Zonal LEDs, General Fire; Energised; Pre-Alarm; Remote Output Activated; Remote Output Disabled; Accessed; Disablement; Test; Silenced; General Fault; System Fault.
Protocol/compatibility:	Apollo XP95/Discovery
Construction & finish:	Metal
Dimensions:	410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid).
Weigh:	4,5 kg (without batteries).
Operating temperature:	-5ºC to +40ºC
IP rating:	IP30
Technical data
Approvals/certifications	Certified to EN54-2/4 by the LPCB (0832-CPD-0772).