Fire alarm system

Apollo XP95 Optical Smoke Detector DILL switchFully compatible with C-TEC's XFP & ZFP XP95/Discovery Addressable Fire Panels.Works using the light scatter principle.Responds well to slow-burning, smouldering fires.Well-suited for bedrooms and escape routes.Red LED illuminates when..

Isolator for addressable systemsThe Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short-circuit is removed, the isolators automatically restore power and data to the isolated sec..

XFP Networkable control panel single loop;16 zone panel;Тhird-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB);Compatibility with Apollo’s XP95/Discovery protocol;Two independently programmable conventional sounder circuits;Two programmable inputs;A fault output re..

XP95 red manual addressable call point  Fully compatible with C-TEC's XFP & ZFP XP95/Discovery Addressable Fire PanelsВith built-in 20 devices isolator;ResettableCertified to EN 54-11 EN 54-17..

Apollo Waterproof Manual Call Point with IsolatorFully compatible with C-TEC's XFP & ZFP XP95/Discovery Addressable Fire PanelsВith built-in 20 devices isolator;ResettableCertified to ЕN 54-11 EN 54-17..

Apollo XP95 Standard Temperature Detector DILL switchA high quality Type A2S standard temperature (55°C) heat detector Fully compatible with C-TEC's XFP & ZFP XP95/Discovery Addressable Fire Panels.Monitors temperature by using a single thermistor which provides a voltage out..

Isolator Base..

XFP Networkable control panel single loop;32 zone panel;Тhird-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB).Compatibility with Apollo’s XP95/Discovery protocol. Two independently programmable conventional sounder circuits. Two programmable inputs. A fault ..

Apollo XP95 High Temperature Detector DILL switchA high quality Type CS high temperature (90°C) heat detector Fully compatible with C-TEC's XFP & ZFP XP95/Discovery Addressable Fire Panels.Monitors temperature by using a single thermistor which provides a voltage output propo..

Apollo XP95 I.S. Manual Call PointXP95 Intrinsically Safe (IS) detectors are a development of the well established analogue addressable XP95 range from Apollo. XP95 IS detectors feature all the benefits of the standard range, but are developed specifically for use in hazardous areas.Resettable..

The duct smoke detector is supplied as a housing with a base fitted for either a conventional detector or an analogue addressable detector. The housing has provision for electrical connections depending on the type of detector fitted. For technical data on the detector head, please refer to the ..

The Intelligent Switch Monitor is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables to report the status. It has a selectable status reporting delay making it suitable for monitoring flow switches...

Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all potential fire service entrances).Offers all of the functions and controls of an XFP Main panel (access levels 1, 2 and 3).Includes an on-board fault relay.Requires its own dedicated Mains power and battery ..

XP95 I.S. Manual Call Point MEDC StyleXP95 Intrinsically Safe (IS) detectors are a development of the well established analogue addressable XP95 range from Apollo. This manual fire alarm call point has been designed for use in flammable atmospheres and harsh environmental conditions. The GRP enc..

Compact addressable ceiling sounderThird-party certified to EN54-3 (Sounders) and 17 (Isolators) by Intertek;Impressive 91dB(A) sound output @ 1m;Onboard short-circuit loop isolator;Group addressing facility allows multiple devices to be operated simultaneously;7 selectable volume levels and up to 1..

The Intelligent Twin Switch Monitor provides the function of two Switch Monitor units within one enclosure. The two units are electrically independent of each other. There is a DIL switch on each unit to set the address.Both Switch Monitor units in the enclosure are designed to monitor the..

Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all potential fire service entrances).Offers all of the functions and controls of an XFP Main panel (access levels 1, 2 and 3).Includes an on-board fault relay.Requires its own dedicated Mains power and battery ..

Compact W-3-3.1 Wall VAD c/w 91dB(A) Sounder beaconThird-party certified to EN54-3 (Sounders), EN54-23 (VADs) and 17 (Isolators) by Intertek;Impressive 91dB(A) sound output @ 1m;Provides 'W-3-3.1' light distribution when wall mounted (min 0.4 lux over a 3 x 8m cylindrical area);Can also provide 'C-3..

Negative switching Isolating base for the Apollo DiL Switch detectors..

An optional system expansion device for use with XFP 1/2 Loop 32 Zone fire panels.Allows the connection of up to eight XFP Repeaters or eight XFP Main panels (any mix) on an RS485 network.One AFP711 card required per networked Main XFP 1/2 Loop 32 Zone panel (note that XFP510-16 and XFP510-..

An optional system expansion device for use with C-TEC's XFP Single Loop 16 Zone addressable fire panels.Allows the connection of up to eight XFP Repeaters or eight XFP Main panels (any mix).One XFP761 required per networked Main XFP Single Loop 16 Zone fire panel (note that XFP510-16 and X..

Apollo XP95 Optical Smoke DetectorFully compatible with C-TEC's XFP & ZFP XP95/Discovery Addressable Fire Panels.Works using the light scatter principle.Responds well to slow-burning, smouldering fires.Well-suited for bedrooms and escape routes.Red LED illuminates when the detecto..

Addressable wall sounderThird-party certified to EN54-3 (Sounders) and 17 (Isolators) by LPCB;Impressive 103dB(A) sound output @ 1m;Onboard short-circuit loop isolator;Group addressing facility allows multiple devices to be operated simultaneously;7 selectable volume levels and up to 15 selectable t..

The Zone Monitor powers and controls the operation of a zone of up to 20 Apollo Series 65 or Orbis Fire Detectors from a Discovery or XP95 loop...

Apollo XP95 Standard Temperature DetectorA high quality Type A2S standard temperature (55°C) heat detector Fully compatible with C-TEC's XFP & ZFP XP95/Discovery Addressable Fire Panels.Monitors temperature by using a single thermistor which provides a voltage output proporti..

Addressable wall sounderThird-party certified to EN54-3 (Sounders) and 17 (Isolators) by LPCB;Impressive 103dB(A) sound output @ 1m;Onboard short-circuit loop isolator;Group addressing facility allows multiple devices to be operated simultaneously;7 selectable volume levels and up to 15 selectable t..

The Intelligent Mains Switching Input/Output Unit provides a single line tolerant circuit (CoreProtocol only) containing one or more normally open contacts connected to a single pair of cables. It also provides a voltage free change over relay output capable of switching mains...