Your Cart

Apollo XP95 Standard Temperature Detector

Apollo XP95 Standard Temperature Detector
Apollo XP95 Standard Temperature Detector
60.00 лв.
Ex Tax: 60.00 лв.

Apollo XP95 Standard Temperature Detector DILL switch

  • A high quality Type A2S standard temperature (55°C) heat detector 
  • Fully compatible with C-TEC's XFP & ZFP XP95/Discovery Addressable Fire Panels.
  • Monitors temperature by using a single thermistor which provides a voltage output proportional to the external air temperature.
  • Responds well to flaming fires with high heat output.
  • Typically used in areas where smoke detectors cannot be installed such as kitchens.
  • Red LED illuminates when the detector is in alarm.
  • Certified to EN54-5 by the LPCB.
  • Requires a 45681-200IMC standard base or45681-504IMC low power relay base.

Technical data
Application temperature:25°C typical, 50°C max.
Operating Voltage:17 to 28V DC
Static response temperature:54°C typical, 70°C max
Current consumption in alarm2mA (LED illuminated)
Indicators:Clear LED emitting red light when in alarm
Quiescent current250µA average; 500µA peak.
IP rating:IP43
Dimensions:100mm diameter x 42 mm H (not in base). 50mm height when in base.
Weigh:0,105 kg
Operating temperature:-20ºC to +60ºC
Others:Requires a standard base 45681-200IMCI or relay base 45681-504IMC
Because we are sure for the quality of our products, we give 36 months for all products!
Fast delivery within 10-20 days after order.
You can take advantage of the services we offer: consultancy, design, delivery, installation, warranty and non-warranty support.